Skip to main content

SIG P320 X-Five Pistol Review

The SIG Sauer P320 X-Five is one of the best out-of-the-box competition guns you're going to find.

SIG P320 X-Five Pistol Review
Photo by Yamil Sued

2017 was a heck of a year for SIG Sauer. During the shooting industry’s big trade show, SIG announced it had won the Army’s Modular Handgun System contract with a version of the P320 only slightly different from its commercial model. And at the same show, SIG debuted two new eagerly anticipated versions of the P320: the X-Five and the V-TAC.

The subject of this review, the P320 X-Five, is of a dedicated competition pistol, but it’s unlike other X-Fives.

Previous SIG X-Fives were built on P226 or P220 frames, and while the new P320 X-Five was designed, like the rest, from the ground up to be a dedicated competition pistol, it offers new features that will make their way into other P320 models. SIG didn’t just take a factory 320 and put fancy sights on it and call it a “competition model.” People who knew exactly what a competition pistol needs completely revamped the platform.

Let me start with the frame. This pistol features SIG’s X-Frame. The standard P320 has a nearly vertical grip angle, and while it works, it isn’t ideal. The X-Frame has been recontoured to feature more of an angle, similar to what you might find on a 1911.


It isn’t just the increased angle of the X-grip that is important. It is also the undercut below the triggerguard and at the rear of the frame (which has a nice beavertail). Between the two, your hand will sit about an eighth of an inch higher on this gun than on a standard P320. That may not sound like much, but it does make a difference. It means less felt recoil and less muzzle rise.


What texturing there is on the frame is nicely aggressive, but there is a lot of smooth surface on the grip in-between the textured areas, and the smooth areas are raised above the textured ones. The ambidextrous slide release and reversible magazine release are of standard P320 design and work well.

At the bottom of the X-Five’s frame, you will see a nice, steel magwell. It is easily removable via a single screw at the rear of the grip. Inside the frame at the rear, you will also find a weight that is easily removable once you pop out the trigger chassis.

SIG X5
The magwell is intended for use with the supplied 21-round magazines. If you want to run flush mags or your chosen division doesn’t permit wells, it’s easily removed. (Photo by Yamil Sued)

P320s with the X-Frame use the same magazine bodies as other P320s, and four — four! — 21-rounders are supplied with the gun. If you want to use older magazines with the new frame on the 320, you’ll need to do a little filing on the base pads because the frame contour is different now. All new P320 magazines going forward will have the new base pad found on the P320 X-Five, and they will work with standard or X-Five frames.

However, even the new 17-round magazines won’t lock into the X-Five because of the magazine well. They do fit with a little filing on the front of the base pad, but most competition shooters running flush magazines in this gun — those competing in divisions where magazine capacity is limited or magwells are not permitted — are going to be removing the magazine well anyway.


The X-Five sports a straight trigger with a flat face that breaks at 90 degrees. Designed with input from well-known SIG customizer GrayGuns, this trigger bar offers increased leverage, so the trigger pull will average about 5 pounds, as opposed to the 7-pound trigger you find on standard P320s. Trigger pull on my sample was 5 pounds exactly.

The original full-size P320 has a 4.7-inch barrel. With the X-Five, the barrel has been stretched to an even 5 inches and given a target crown. The extra barrel length will give you a little extra velocity if you’re worried about your ammo making minimum Power Factor, and the extra slide length gives you a longer sight radius to help your accuracy. In a match, every little bit helps.

Every veteran competition shooter has learned that more reciprocating weight equals more felt recoil and muzzle rise, which is why you’ll see cutouts on the top of the X-Five’s slide. As a result, while it is .3-inch longer than a standard P320 and sports bigger/heavier sights, you’ll find the slide actually weighs the same. The X-Five with internal frame weight, magwell and empty magazine in place tips the scales at 351/2 ounces, which is 6 ounces more than a standard P320 — but none of that weight is in the slide.


SIG X5
The front sight is a Dawson Precision fiber optic, and the slide-to-barrel fit is as tight as you’d find on a custom 1911 — even though the X-Five is an assembly line gun. (Photo by Yamil Sued)

Let’s talk about the sights. Most manufacturers’ “competition pistols” hardly live up to the name, and the sights are where they often fall short. The P320 X-Five features Dawson Precision sights. Dawson Precision is a name familiar to competition shooters, and these sights are near perfect: a tall post front with a green fiber-optic insert and a serrated plain black fully adjustable rear.

SIG X5
The rear sight is a Dawson Precision adjustable, and it can be removed and replaced with a red-dot sight. (Photo by Yamil Sued)

The rear sight is mounted to a removable plate. Take it off and you can mount a mini red dot on your slide. Of course, SIG recommends its Romeo1. The only hiccup here is that to remove the plate, you have to remove the striker assembly and extractor parts from the slide because the extractor spring blocks access to one of the retaining screws. However, the disassembly is amazingly simple and takes only a few seconds.

The slide features serrations front and back that are angled to match the grip. The slide is actually stainless steel with a Nitron coating. The silver barrel looks really nice through the lightening holes cut into the top of the slide. Sure, performance is important, but looks count, too. While everyone has different tastes, to my eyes, the P320 X-Five is an attractive pistol.

SIG X5
Lightening cuts in the slide reduce its reciprocating mass, which in turn reduces muzzle jump and therefore speeds follow-up shots — a key to doing well in the action sports. (Photo by Yamil Sued)

The barrel does not feature the same locking block profile as a standard P320 barrel, and it’s the tightest fitted of any pistol barrel I’ve seen outside a custom 1911. If you just ease the slide forward, it won’t go into battery because the barrel fit is so tight; you have to let it slam home. And the reward for that tightness is excellent accuracy.

With that barrel fit in mind, I checked with Phil Strader, SIG’s polymer pistol product manager, wondering where on the spectrum between custom and production the X-Five lies. He told me that the P320 X-Five is a pure assembly line production gun. “The only tweaking that is typically needed is a slight hone for tight barrel/slide fits, and that’s done on the line as needed,” he said.

Strader had a hand in making the P320 X-Five what it is, so his background is worth mentioning. Not only is he a former police officer, gun store owner and professional shooter, sponsored over the years by the likes of Smith & Wesson and Remington, but he was the president of the U.S. Practical Shooting Association. The military would refer to him as a “subject matter expert,” so I am not surprised the P320 X-Five lives up to expectations.

The P320 X-Five doesn’t have the lowest bore of pistols you’ll find in the action sports, but neither does it have the highest. Why is this important? The higher the bore off the hand, the more muzzle rise you get in a pistol, slowing down follow-up shots, which are critical when the difference between winning and losing a match is measured in hundredths of a second. Considering SIG’s shooting team captain, Max Michel, has set a Steel Challenge speed record shooting a P320, the design has already been proven fast enough to win.

I tested this pistol with various factory ammo as well as my competition load, a 147-grain Hornady full metal jacket over 3.3 grains of Titegroup and a Winchester Small Pistol primer using old mixed brass. At 892 feet per second (fps), it produces a Power Factor of 131. In addition to accuracy testing, I stuck the gun in my bag and attended a few USPSA matches.

Whenever I attend a local match with a test gun, the guys I shoot with, who have known me for years, always ask, “So what do you really think?” After shooting the P320 X-Five in practice and at several USPSA matches in Production and Limited divisions, I think it’s as close to perfect as you can get for an out-of-the-box USPSA Production Division gun, and it’s a great choice for any other USPSA/IDPA division for which it qualifies.

SIG X5
(*Handload) Accuracy is the average of four, five-shot groups at 25 yards from a sandbag rest. Velocity is the average of 10 shots measured with an Oehler Model 35P chronograph 12 feet from the muzzle.

All pistols handicap the shooter in some way, and the trick is to find the pistol that handicaps you least. From the factory, this pistol is low handicap — with terrific sights, excellent accuracy, impeccable reliability and a serviceable trigger pull. The SIG P320 X-Five will allow anyone who has the skill and puts in the practice to attain B class — if not A class — in USPSA.

To make this pistol perfect for anyone at the higher skill levels requires only a little work. First, a trigger job to get the pull below 5 pounds. Second, a lighter recoil spring, somewhere around 13 pounds, will reduce muzzle bounce. This would require a new recoil spring rod, so at that point you might as well swap out the factory piece with a heavier steel model to put a little recoil-reducing weight near the muzzle. Third, the gun has too many smooth spots for my taste, so I’d put some stippling on it.

I have seen the P320 X-Five in the hands of several shooters at local USPSA matches. I talked to those shooters, and they all really liked the gun. In that, we are in agreement. When I first began competing, I would have killed for a pistol like this. SIG Sauer has a winner on its hands.

SIG P320 X-Five Specs

  • Type: Striker-fired, semiautomatic
  • Cartridge: 9mm
  • Capacity: 21+1 rds.
  • Barrel: 5 in.
  • OAL/Height/Width: 8.5/6.5/1.2 in.
  • Weight: 35.5 oz.
  • Construction: Polymer-frame, stainless steel slide with black Nitron coating
  • Sights: Dawson Precision post w/ fiber-optic insert (front), fully adjustable notch (rear) (removable for red dot)
  • Trigger: 5 lbs. (measured)
  • Safety: Striker drop
  • Price: $1,005
  • Manufacturer: SIG Sauer, sigsauer.com
Current Magazine Cover

Enjoy articles like this?

Subscribe to the magazine.

Get access to everything Guns & Ammo has to offer.
Subscribe to the Magazine

GET THE NEWSLETTER Join the List and Never Miss a Thing.

Recommended Articles

See More Recommendations

Popular Videos

Benelli Lupo Bolt-Action Rifle Review

Benelli Lupo Bolt-Action Rifle Review

It is unlike any other rifle on the market because it offers features no one else does; those looking for a rifle that fits like a custom-made firearm should look no further than the Benelli Lupo.

First Look: Springfield Armory Model 2020 Waypoint Bolt-Action Rifle

First Look: Springfield Armory Model 2020 Waypoint Bolt-Action Rifle

At the heart of the rifle is the Model 2020 action which wish designed and built with very tight tolerances thanks to Springfield's technology-driven manufacturing capabilities The stainless steel action features an integral recoil lug, and pairs with a fluted bolt employing dual cocking cams and an enhanced extractor for high pressure loads. The blueprinted and precisely machined action allows Springfield to offer the Model 2020 with .75" MOA accuracy guarantee. Despite being a production rifle, the Model 2020 should rival more expensive custom builds.

Trijicon

Trijicon's New Specialized Reflex Optics (SRO)

The Trijicon SRO is specifically designed for pistol use. The wide field of view and clean, crisp dot makes it easy for users to find and track the dot in both target and competitive shooting applications.

Cameras Don

Cameras Don't Lie: Subsonic 9mm vs. .300 Blackout

In this segment of "Cameras Don't Lie," a subsonic-ammo showdown, 9mm vs. .300 Blackout fired from AR rifles.

See More Popular Videos

Trending Articles

The Taurus TX22 rimfire shoots like no other.Taurus TX22 Rimfire Review Reviews

Taurus TX22 Rimfire Review

Eric Poole - May 23, 2019

The Taurus TX22 rimfire shoots like no other.

Whether you're going hunting or to the range, hitting your target is more fun when you have a zeroed rifle scope. Here's how to sight in your rifle scope setup in five quick-and-easy steps.How to Sight In a Rifle Scope in 5 Steps How-To

How to Sight In a Rifle Scope in 5 Steps

Craig Boddington - June 04, 2018

Whether you're going hunting or to the range, hitting your target is more fun when you have a...

Some guns are easier to work with than others, but the Ruger American Rifle doesn't require an engineering degree to tinker with; here's a look at some upgrade options to take your Ruger American to the next level, and make it something a bit different.Top Ruger American Rifle Upgrades Accessories

Top Ruger American Rifle Upgrades

Philip Massaro - March 15, 2018

Some guns are easier to work with than others, but the Ruger American Rifle doesn't require an...

9 Commonly Misused Gun Terms How-To

9 Commonly Misused Gun Terms

Kyle Wintersteen

"Assault weapon." Sixteen-round "clip." A box of "bullets." When it comes to guns and gun...

See More Trending Articles

More Reviews

Available in 9mm, .45 ACP, and 10mm, the Kimber Rapide Black Ice 1911 sports a new look while maintaining the same topshelf performance as the original Rapide.Kimber Rapide Black Ice 10mm Review – A Truly Unique 1911 Reviews

Kimber Rapide Black Ice 10mm Review — A Truly Unique 1911

James Tarr - September 08, 2020

Available in 9mm, .45 ACP, and 10mm, the Kimber Rapide Black Ice 1911 sports a new look while...

The sub-­7-­pound Winchester Model 1894 Deluxe Short Rifle has an overall length of 38-­inches and a length of pull that measures 13½ inches, making it suitable for self-defense or hunting purposes.Winchester Model 1894 Deluxe Short Rifle Review Reviews

Winchester Model 1894 Deluxe Short Rifle Review

Proofhouse - October 22, 2020

The sub-­7-­pound Winchester Model 1894 Deluxe Short Rifle has an overall length of 38-­inches...

Ruger's latest PC Charger 9mm wants to be your next self-­defense pistol.Ruger PC Charger Review Reviews

Ruger PC Charger Review

Tom Beckstrand - September 25, 2020

Ruger's latest PC Charger 9mm wants to be your next self-­defense pistol.

The Savage Arms 110 Elite Precision is an excellent all-around rifle for most shooting activities that don't require light weight. It can be made to fit just about anyone, with a chassis that allows for accurate, rapid and effective positional shooting. And while the 110 Elite Precision is not inexpensive, it still costs less than most custom rifles. Savage Arms 110 Elite Precision Review: Excellent All-Around Rifle Reviews

Savage Arms 110 Elite Precision Review: Excellent All-Around Rifle

Proofhouse - September 15, 2020

The Savage Arms 110 Elite Precision is an excellent all-around rifle for most shooting...

See More Reviews

Magazine Cover

GET THE MAGAZINE Subscribe & Save

Digital Now Included!

SUBSCRIBE NOW

Give a Gift   |   Subscriber Services

PREVIEW THIS MONTH'S ISSUE Arrow

Buy Digital Single Issues

Don't miss an issue.
Buy single digital issue for your phone or tablet.

Buy Single Digital Issue on the Guns & Ammo App

Other Magazines

See All Other Magazines

Special Interest Magazines

See All Special Interest Magazines

GET THE NEWSLETTER Join the List and Never Miss a Thing.

Phone Icon

Get Digital Access.

All Guns and Ammo subscribers now have digital access to their magazine content. This means you have the option to read your magazine on most popular phones and tablets.

To get started, click the link below to visit mymagnow.com and learn how to access your digital magazine.

Get Digital Access

Not a Subscriber?
Subscribe Now