Real Avid Master Grade Scope Mounting and Bore Sighting Kit: Full Review

A properly mounted scope and leveled reticle are crucial to long-range precision shooting. One might assume that a level scope turret equates to a level reticle, but that’s not necessarily true because the turret on many scopes has not been properly aligned with the reticle. In this case, it’s the reticle that must be aligned.

If the reticle is canted clockwise, your rounds will impact right-of-center and left for counterclockwise. As distance increases, so does the variance of your impacts from your target. With the  Master Grade Scope Mounting and Bore Sighting Kit from Real Avid, you can level the reticle with precision and quickly establish a good zero.

The kit consists of three main components: The Level-­Right Pro level, the Viz-­Max Bore Sighter and the Smart-­Torq torque driver. The first step is to get the rifle level. For that, position the Level-­Right Pro on the barrel against the scope and using the integrated bubble level, level the rifle.

Now, mount the Precision Alignment Grid to the mini tripod (both supplied) behind the rifle, confirming that the grid is level. Turn on the light projector and adjust scope magnification and the diopter on the ocular lens until the reticle is sharply displayed on the grid. Twist the scope within the rings until the crosshairs precisely align with the grid lines.

Finally, tighten the scope rings to manufacturer’s specification using the Smart-­Torq torque driver. The Smart-Torq comes with bits designed to fit most optics, mounting rings, and base brands, and has a 10- to 70-inch-pound (in.-lb.) adjustment range. Real Avid’s Force Assist allows you to attach the small driver to the Smart-­Torq for extra leverage on high-torque screws or bolts. Now, it’s time to head to the range to get sighted in.

Sighting in a rifle can be a frustrating and time-­consuming endeavor. It can also be expensive as you blow through round after round trying to get dialed in. Rather than rely on the trial-­and-­error approach, try the Viz-­Max Bore Sighter.

The Viz-­Max Bore Sighter has two parts: The boresight and a chamber flag. Insert the chamber flag into the barrel’s breech and attach the magnetized end of the boresight to the muzzle.

Turn on the boresight to project a green laser onto the target. If the dot is faint, use one of the supplied reflective stickers to make it easier to see. Adjust the scope turrets to align the reticle with the laser dot. The final step is to remove the Viz-­Max Bore Sighter and chamber flag and fire a shot to confirm the boresight. From there, zero the scope at your preferred distance.

Real Avid’s Master Grade Scope Mounting and Bore Sighting Kit makes precision scope leveling easy, and it’s an efficient way to boresight your rifle. Visit realavid.com for more information. 

---